500 PLC Control Rigid Frame Cable Stranding Machine For Bare Wire
1. Application
The machine is suitable for stranding long length and section bare aluminum copper,aluminum alloy, aluminum cable steel reinforcing wires to product the following power cables,Sector shapped conductors,round compacted .With high rigid, high performance, high speed and low inertia.
2. Main components
2.1 Pay-off 1set
2.2 Rigid strander each reel 1set
2.3 Compacting and Assembly die holder 1set
2.4 Pre-twist & compacting device 1set
2.5 Meter counter 1set
2.6 Capstan 1set
2.7 Take up with traversing stand 1set
2.8 Main cabinet and operation cabinet 1set each
3. Features
3.1 Driven by 36-stage variable gear-box, dual hauling and dual active device.
3.2 Whole structure will be machined on the big horizontal lathe.
3.3 Take-up and traversing stand can use column type and portal type as well.
3.4 The machine uses original imported PLC to control the whole line, control the setting and running of respective electrical equipment.
3.5 The most advanced emergency stop device, direct controlling every reel. As soon as any wire breaks, the entire machine will automatically stop at once.
4. Technical Parameters
| Model (Rigid Stranding Machine) | JLK-500 | JLK-630 | JLK-710/720 |
| Diameter of single wire | Copper | φ1.5-5 mm | φ1.5-5 mm | φ1.5-5 mm |
| Aluminum | φ1.5-5 mm | φ1.5-5 mm | φ1.5-5 mm |
| Maximum stranded conductor OD | φ35-55 mm | φ35-55 mm | φ35-55 mm |
| Stranding Pitch | 6 Bobbin Stranding Cage | 40-719 mm | 51-896 mm | 54-963 mm |
| 12 Bobbin Stranding Cage | 40-719 mm | 51-896 mm | 54-963 mm |
| 18 Bobbin Stranding Cage | 44-793 mm | 63-1056 mm | 57-1012 mm |
| 24 Bobbin Stranding Cage | 51-924 mm | 71-1246 mm | 66-1190 mm |
| 30 Bobbin Stranding Cage | 57-1028 mm | 87-1553 mm | 79-1403 mm |
| Rotating Speed | 6 Bobbin Stranding Cage | 230.6 r/min | 180.1 r/min | 150.6 r/min |
| 12 Bobbin Stranding Cage | 230.6 r/min | 180.1 r/min | 150.6 r/min |
| 18 Bobbin Stranding Cage | 208.5 r/min | 155 r/min | 142.6 r/min |
| 24 Bobbin Stranding Cage | 179 r/min | 130.1 r/min | 122.3 r/min |
| 30 Bobbin Stranding Cage | 161.8 r/min | 115.9 r/min | 102.7 r/min |
| Capstan | Capstan Wheel Diameter | 2000 mm | 2000 mm | 2000 mm |
| Maximum Haul-off Force | 30 T | 30 T | 40 T |
| Pre-spiral Device | Pitch | 500-2500mm | 500-2500mm | 500-2500mm |
| Motor Power | 90-180 KW | 110-180 KW | 130-180 KW |
| Bobbin Size | 500*375*127 | 630*475*127 | 710*530*127 |
| Center Payoff Bobbin | 1600*800*80 | 1600*800*80 | 1600*800*80 |
| Take-up Bobbin | 2500*1500*125 | 2500*1500*125 | 3150*1900*160 |
| Maximum Haul-off Linear Speed | 69 m/min | 69 m/min | 62 m/min |
| Central Height | 1000 mm | 1100 mm | 1100 mm |
5. Photos
6. Packing photos
7. Our factory and company introduction
Hejian Baohong Electrical Machinery Co., Ltd. was established in 2006. Our company is located in the Economic Development Zone of Hejian City, Hebei Province, has been the largest professional manufacturer for wire stranding machine and laying-up machine in North China.
Since 2006, relying on the care and support of our customers, Baohong Machinery has been devoted to the research and development of wire stranding machine and laying-up machine and has made great improvement. Now we have become the only one factory who can develop the production of the JLK rigid stranding machine series to be an assembly line processing in China, and we also have independently developed the JGB Bow skip stranding lines, the CGB Bow skip type cabling lines and the CLY High speed Cradle type Laying-up lines.
Now, Hejian Baohong Electrical Machinery Co., Ltd., covers an area of 10000 square meters, production workshop 8000 square meters. Our company has 60 employees, including 10 R & D staffs. Annual output value is over 10 million dollars at present,and has developed into one of the most important Stranding Machine Manufacturer in China.
Product Tags:
|
|
500 PLC Control Rigid Frame Cable Stranding Machine For Bare Wire Images
|
